Input power: 2.4w
Fan speed:About 1300 RPM
Air flow: About 41.4CFM
Air pressure: 1.21mmH2O
Bearing Type: Hydraulic
Noise Level: 21dB(A)
LED input Power: 0.4-1.5W
LED CURRENT: 0.043-1.5A
Life Expectancy: 40.000hrs
Strip Length: 300 mm
Extended Cable Length:500 mm
LED Light Qty: 18pcs
LED relate power: 90mW
LED Rated Current: 20mA
LED Rated Voltage: DC 12V
Working Temperature: -20~+60 Degree
Storage Temperature: -30~+80 Degree
2x 120mm pc fan
2x 300mm led strip
1x Remote control board
1x IR receiver
1x SATA cable
Q 1: why without screw thread on the screw hole?
A: Our company’s PC fans is made of plastic, it’s easy to slip off.if there is screw thread, This would result in the whole fan not being able to be fixed or be used.
Q 2: why so hard to screw in with a screwdriver?
A: Because there are not threaded screw holes, screw must be pushed hard, so we have a large screw head design. Although the “small screwdriver” can be barely screwed, but have to spend a lot of effort to do so, and it is easy to make the screw slip out. Therefore, we highly recommend using large screwdriver it’s easy to installation fastly
- LEDdess Model White LED Fan for Computer Cases, Long Life CPU Coolers, Gaming PC LED Lights
- The Size of 120mm-Compatible with Various Types of Chassis, Suitable for CPU Type Water-CooLED Radiator Radiator. The Speed of 800-1800Rpm + 10%, Multi Channel Inlet Design, Collocation Innovation Aerodynamic Inlet Design Fan And LED Lights, Very Cool Operation.
- Standard 12cm Size-Compatible with All Types of Chassis,Suitable for Water Cooling,Cold Discharge Light Effect, CPU Radiator, Side Through Version of Mod Light Efficiency of Fan Position In Cabinet,Different Angles And Light Show Different Visual Effects.
- LEDdess Design-Silent Noise Reduction,That 8 Damping Silicone Pads Fixed On Both Sides of The Fan Frame Is to Reduce The Noise of The Polarization Motor Vibration.
- RGB LED: Colorful Lightning Design, Red,Green,Blue, White,Color Transformation, One Key to Change The Color